Removal |
1. |
Release the residual pressure in the fuel line.
(Refer to Fuel Delivery System - "Release Pressure in Fuel Line")
|
2. |
Fold the rear seat cushion.
(Refer to Body - "Rear Seat Assembly")
|
3. |
Open the service cover (A) after loosening the screws (B).
|
4. |
Disconnect the fuel pump connector (A).
|
5. |
Disconnect the fuel feed quick-connector (B) and the vapor tube quick-connector
(C).
|
6. |
Lift the vehicle and support the fuel tank with a jack (A).
|
7. |
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation
hose (C).
|
8. |
Remove the under cover (A) after remove the mounting nuts (B).
|
9. |
Remove the fuel tank mounting bolts (A) and then remove the fuel tank
(B).
|
Installation |
Fuel tank installation bolt:
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|
Kia Cee'd JD Owners Manual: Owner’s responsibility
✽ NOTICE
Maintenance Service and Record
Retention are the owner's responsibility.
We recommend in general that you have
your vehicle serviced by an authorized
Kia dealer. You should retain documents
that show proper maintenance has been
performed on your vehicle in accordance
with th ...
Kia Cee'd JD Service Manual: Description and operation
Description
Clutch switch is connected to clutch pedal and transmits clutch operating state
to ECM.
When clutch pedal is depressed during driving, engine load changes from loaded
to none loaded condition. However, ECM regards vehicle to be loaded becuase
VSS signal is s ...