Kia Cee'd: Fuel Delivery System / Fuel Sender Assembly Repair procedures

Kia Cee'd JD Service Manual / Fuel System / Fuel Delivery System / Fuel Sender Assembly Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”)

2.	Disconnect the electric pump & sender wiring connector (A).

3.	Remove the fuel feed tube (A) from the fuel filter after releasing the fixing clip (B).

4.	Remove the plate assembly (C) after removing the cushion pipe fixing hooks (D).

5.	Disconnect the electric pump wiring connector (A) from the pump.

6.	Remove the reservior cup (B) after releasing the fixing hooks (C).

7.	Remove the fuel sender (A) with sliding it downward after releasing the latch (B).

Installation

1.	Installation is reserve of removal.

Fuel Pump Motor Repair procedures

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender ...

Fuel Pressure Regulator Repair procedures

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender ...

Other information:

Kia Cee'd JD Service Manual: Instrument Cluster Repair procedures
Inspection Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. Use wheel chocks (A) as appropriate. 3. Check if the speedometer ...

Kia Cee'd JD Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...