Kia Cee'd: Front Seat Belt / Front Seat Belt Buckle Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Disconnect the front seat belt buckle connector wiring (A).

3.
After loosening the mounting bolt, then remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
Make sure the connector is plugged in properly.
Front Seat Belt Buckle Components and components location
Component Location   1. Front seat belt buckle ...

Rear Seat Belt
...

Other information:

: Adjusting the Seatbelts During Pregnancy
WARNING: Always ride and drive with your seatback upright and properly fasten your seatbelt. Fit the lap portion of the seatbelt snugly and low across the hips. Position the shoulder portion of the seatbelt across your chest. Pregnant women must follow this practice. See the following figure. ...

Kia Cee'd JD Service Manual: Specifications
Specifications IMS Electrical System   Item Specification Rating voltage DC 12V Operating voltage DC 9V ~ 16V Operating temperature -30°C ~ +80°C ...

© 2017-2026 www.kceed.com