Kia Cee'd: Timing System / Front Oil Seal Repair procedures

Removal and Installation
1.
Crankshaft damper pulley.
(Refer to Timing System - "Damper Pulley")
2.
Remove the front oil seal.
  
Using the SST(09455-21200), reassemble the timing chain cover oil seal.

3.
Install in the reverse order of removal.
Front Oil Seal Components and components location
Components   1. Front oil seal ...

Timing Chain Cover Components and components location
Components   1. Timing chain cover ...

Other information:

Kia Cee'd JD Owners Manual: Jack label
■ Type A ■ Type B ■ Type C 1. Model Name 2. Maximum allowable load 3. When using the jack, set your parking brake. 4. When using the jack, stop the engine. 5. Do not get under a vehicle that is supported by a jack. 6. The designated locations under the frame 7. When supp ...

Kia Cee'd JD Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between ...

© 2017-2025 www.kceed.com