1. Set the mode to the
position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
System operation
HeatingKia Cee'd JD Service Manual: Transmission Control Module (TCM) Schematic diagrams
TCM Connector and terminal
function
TCM Terminal Function
Connector [A]
Pin
Description
Pin
Description
1
Select actuator
17
-
2
...
Kia Cee'd JD Owners Manual: Static bending light
While driving the corner, for your sight
and safety, the static bending light turns
on automatically. The system will operate
automatically as follows:
When vehicle speed is under 10km/h
and steering wheel angle approximately
80 degrees.
When vehicle speed is over 10km/h
and ste ...