Kia Cee'd: System operation / Ventilation
1. Set the mode to the 
position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
System operation
...
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside
(fresh) air position.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the ...
Other information:
Kia Cee'd JD Service Manual: Heater & A/C Control Unit (DATC) Repair procedures
Self Diagnosis
1.
Self-diagnosis process
2.
How to read self-diagnostic code
After the display the panel blinks three times every 0.5 second, the
corresponding fault code blinks on the setup temperature display pan ...
Kia Cee'd JD Service Manual: Parking Assist Sensor Repair procedures
Removal
[Rear Bumper]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover")
3.
Disconnect the connector (A) from the ...
