| Replacement |
|
|
| 1. |
Loosen the mounting screws, then remove the sunvisor (A) and retainer
(B).
|
| 2. |
Install in the reverse order of removal.
|
Sunvisor Components and components location
Assist Handle Components and components location: Programming a MyKey. Clearing All MyKeys. Checking MyKey System Status.
Using MyKey With Remote Start Systems
Programming a MyKey
You can program any remote control to
become a restricted MyKey, but you must
leave one unmodified as an admin key.
Switch the ignition on using an admin
key.
Press Settings on the touchscreen.
Press Vehicle Settings.
Press MyKey.
Select a setting and press the OK
but ...
: Garage Door Opener Limitations. Programming the Garage Door Opener to Your Hand-Held Transmitter
Garage Door Opener Limitations
Canadian radio-frequency laws require
transmitter signals to time-out (or quit)
after several seconds – which may not be
long enough for HomeLink to pick up the
signal.
U.S. gate operators time-out in the same
manner.
Note: If programming a garage door opener
o ...