Kia Cee'd: SRSCM / SRS Control Module (SRSCM) Components and components location

SRS Control Module (SRSCM) Description and operation

Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to discriminate between an event that warrants restraint system deployment and an ...

SRS Control Module (SRSCM) Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes befo ...

Other information:

Kia Cee'd JD Owners Manual: Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures. If in doubt, we strongly recommend that you have a competent technician or towing service jump start your vehicle. CAUTIO ...

Kia Cee'd JD Owners Manual: Non-operating condition
The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. WARNING The warning light on the outside rearview mirror will illuminate whenever a vehicle is detected at the rear side by the system. To avoid accidents, do ...