Kia Cee'd: Heating,Ventilation, Air Conditioning / Specifications

Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Specifications

Specification

Air Conditioner

Item		Specification
Compressor	Type	6VSx14 (Around Rubber Damper Type)
	Oil type & Capacity	PAG(FD46XG) 110±10cc
	Pulley type	6PK-TYPE
	Displacement	142 cc/rev
Condenser	Heat Rejection	GSL : 13,400 - 3% kcal/h DSL : 12,300 - 3% kcal/h
Expansion valve	Type	Block type
Refrigerant	Type	R-134a or R-1234yf
Refrigerant	Capacity	500 ± 25 g (17.6 ± 0.88 oz.)

Blower Unit

Item		Specification
Intake	Control Type	Actuator
Blower	Type	Sirocco
	Speed Step	DATC: Auto or 1~8 speed, MANUAL : 1~4 speed
	Speed Control	DATC : Power mosfet, MANUAL : Blower resistor
Air filter	Type	Particle filter

Heater And Evaporator Unit

Item		Specification
Heater	Type	Pin & Tube type
	Heating Capacity	4,800 - 5% kcal/hr
	Mode Control Type	Actuator
	Temperature Control Type	Actuator
Evaporator	Cooling Capacity	4,500 - 5% kcal/hr
	Temperature Control Type	Evaporator temperature sensor
	A/C ON/OFF	ON: 2.1 ± 0.5°C (35.8 ± 32.9°F) OFF: 0.6 ± 0.5°C (33.1 ± 32.9°F)

Tightening Torques

Items	N.m	kgf.m	lb-ft
Condenser - Discharge hose	7.8 ~ 11.8	0.8 ~ 1.2	5.7 ~ 8.7
Condenser - Liquid tube	7.8 ~ 11.8	0.8 ~ 1.2	5.7 ~ 8.7
Compressor	19.6 ~ 33.3	2.0 ~ 3.4	14.5 ~ 24.6
Compressor - Discharge hose	18.6 ~ 27.5	1.9 ~ 2.8	13.7 ~ 20.3
Compressor - Suction hose	18.6 ~ 27.5	1.9 ~ 2.8	13.7 ~ 20.3
Expansion valve - Evaporator	7.8 ~ 11.8	0.8 ~ 1.2	5.7 ~ 8.7

Heating,Ventilation, Air Conditioning

...

Special service tools

Special Service Tools Tool (Number and name) Illustration Use 09977-3R000 Disc & hub assembly bolt remover ...

Other information:

: Using Voice Recognition
The SYNC 3 system allows you to use voice commands, to control features like audio and climate controls. By using voice commands, you can keep your hands on the wheel and your eyes on the road. You can access each feature controlled by SYNC 3 through a variety of commands. To activate the SYNC ...

Kia Cee'd JD Owners Manual: Operating condition
1.Place the light switch in the AUTO position. 2.Turn on the high beam by pushing the lever away from you. The high beam assist indicator will illuminate. 3.The High Beam Assist will turn on when vehicle speed is above 45km/h. 4. If the light switch is placed to the headlight position, t ...