Kia Cee'd: Airbag Module / Side Airbag (SAB) Module Description and operation

Kia Cee'd JD Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and operation

Description

The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.

Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Passenger Airbag (PAB) Module Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work. 2. Remove the glove box h ...

Side Airbag (SAB) Module Components and components location

Components ...

Other information:

Kia Cee'd JD Service Manual: Smart Key Unit Repair procedures
Inspection Smart Key Unit – Refer to Smart key system - "Smart key Diagnostic" Smart Key Switch – Refer to Smart key system - "Smart key Diagnostic" Antenna – Refer to ...

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Schematic diagrams
Schematic Diagram 1. C-CAN High/Low 2. MIL. Lamp 3. Immobilizer 4. Canister 5. Manifold Absolute Pressure Sensor (MAPS) 6. Intake Air Temperature Sensor (IATS) 7. Engine Coolant Temperature Sensor (ECTS) 8. Throttle Position Sensor (T ...