Kia Cee'd: Lighting System / Rheostat Repair procedures
| Inspection |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
| 3. |
Remove the crash pad lower switch (A) after loosening the screws.
|
| 4. |
Operate the rheostat switch and check for continuity between terminals.
|
Hazard Lamp Switch Repair procedures
Inspection
1.
It will be able to diagnose defects of hazard switch with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring
and ...
Front Fog Lamps Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the lighting switch of the multifunction switch.
(Refer t ...
Other information:
Kia Cee'd JD Service Manual: Accelerator Position Sensor (APS) Description and operation
Description
Accelerator Position Sensor (APS) is installed on the accelerator pedal module
and detects the rotation angle of the accelerator pedal. The APS is one of the
most important sensors in engine control system, so it consists of the two sensors
which adapt individual ...
Kia Cee'd JD Service Manual: Temperature Control Actuator Description and operation
Description
The heater unit includes mode control actuator and temperature control actuator.
The temperature control actuator is located at the heater unit. It regulates
the temperature by the procedure as follows. Signal from the control unit adjusts
the position of the ...
