Kia Cee'd: General Information / Repair procedures

Inspection
Steering Wheel Play Inspection
1.
Turn the steering wheel so that the front wheels can face straight ahead.
2.
Measure the distance the steering wheel can be turned without moving the front wheels.
Standard value: 30mm (1.1811in.) or less

3.
If the play exceeds standard value, inspect the steering column, shaft, and linkages.
Checking stationary steering effort
1.
Position the vehicle on a level surface and place the steering wheel in the straight ahead position.
2.
Attach a spring scale to the steering wheel. With the engine speed 900 ~ 1100rpm, pull the scale and read it as soon as the tires begin to turn.
Standard value: 3.0kgf or less

3.
If the measured value exceeds standard value, inspect the power steering gear box and MDPS system.
Special service tools
Special Service Tools   Tool (Number and Name) Illustration Use 09561-11001 Steering wheel puller ...

Steering wheel
...

Other information:

Kia Cee'd JD Service Manual: Power Mosfet (DATC) Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed. ...

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Description and operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor (APS) is used to receive driver input. The ECM ...

© 2017-2022 www.kceed.com