Kia Cee'd: Towing / Removable towing hook
1. Open the tailgate/trunk, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the lower part of the cover on the front bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary, we
recommend having it done by an authorized
Kia dealer or a commercial tow-truck
service. Proper lifting and towing procedures
are necessary to prevent dam ...
Emergency towing
■ Front
■ Rear (3 Door and 5 Door)
■ Rear (wagon)
If towing is necessary, we recommend
you to have it done by an authorized
Kia dealer or a commercial tow truck
service.
If towin ...
Other information:
: Selecting a Drive Mode - Plug-In Hybrid Electric Vehicle (PHEV)
and Hybrid Electric Vehicle (PHEV)
Selecting a Drive Mode - Plug-In Hybrid Electric Vehicle (PHEV)
To select drive modes, use the console
mounted control.
Note: Drive mode changes may not be
available when the ignition is off.
Note: Button icon shown may vary from
your vehicle.
Note: Selected drive mode displays in the
informati ...
Kia Cee'd JD Owners Manual: Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of heating
and cooling:
- Heating:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to the outside
(fresh) air or recirculated position.
5. Set ...
