| Inspection |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the front door quadrant innen cover.
|
| 3. |
Disconnect the connector (A) from the mirror.
|
| 4. |
Verify that the mirror operates properly as shown in the table.
Mirror Heater
Turn signal lamp
Puddle lamp
BSD warning lamp
Folding lamp
|
Power Outside Mirror Switch Repair procedures
Power WindowsKia Cee'd JD Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within ...
: High Voltage Battery Vehicle Precautions - Hybrid Electric Vehicle (HEV)
In the event of damage or fire involving an
electric vehicle or hybrid-electric vehicle:
Assume the high-voltage battery and
associated components are energized
and fully charged.
Exposed electrical components, wires
and high-voltage batteries present
potential high-voltage shock hazards ...