To move up a steep grade from a standing start, depress the brake pedal, shift the shift lever to D (Drive). Select the appropriate gear depending on load weight and steepness of the grade, and release the parking brake. Depress the accelerator gradually while releasing the service brakes.
When accelerating from a stop on a steep hill, the vehicle may have a tendency to roll backwards. Shifting the shift lever into 2 (Second Gear) will help prevent the vehicle from rolling backwards.
Good driving practicesKia Cee'd JD Service Manual: Description and operation
Description
Clutch switch is connected to clutch pedal and transmits clutch operating state
to ECM.
When clutch pedal is depressed during driving, engine load changes from loaded
to none loaded condition. However, ECM regards vehicle to be loaded becuase
VSS signal is s ...
Kia Cee'd JD Service Manual: Drive Belt Tensioner Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the alternator.
(Refer to Engine Electrical System - "Alternator")
3.
...