

1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the interior lights, ensure that the light is off to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior light housing notches and snap the lens into place.
CAUTION
Be careful not to dirt or damage lens, lens tab, and plastic housings.
Appearance careKia Cee'd JD Service Manual: Vacuum Pump Repair procedures
Removal
Gamma 1.6 T-GDI
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the under covers (A).
Tightening torque:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ ...
Kia Cee'd JD Service Manual: Intake Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the intake actuator operates to the fresh position when
connecting 12V to terminal 4 and groundi ...