Kia Cee'd: Engine Control System / Injector Specifications

Specification
 
Item
Specification
Coil Resistance (Ω)
1.5 ± 5%[20°C(68°F)]

Injector Description and operation
Description The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fue ...

Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle ...

Other information:

Kia Cee'd JD Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") 3. Dis ...

Kia Cee'd JD Service Manual: Center Pillar Trim Components and components location
Component Location [5Door]   1. Center pillar lower trim 2. Center pillar upper trim [3Door]   1. Rear inner outer trim 2. Center pillar upper trim ...

© 2017-2025 www.kceed.com