Kia Cee'd: Warnings and indicators (Instrument cluster) / Immobilizer indicator

Without smart key system

This indicator illuminates when the immobilizer key is inserted and turned to the ON position to start the engine.

At this time, you can start the engine.The indicator goes out after the engine is running.

If this indicator blinks when the ignition switch is in the ON position before starting the engine, we recommend that the system be checked by an authorized Kia dealer.

With smart key system

If any of the following occurs in a vehicle equipped with the smart key, the immobilizer indicator illuminates, blinks or goes off.

Air bag warning light
This warning light will illuminate for approximately 6 seconds each time you turn the ignition switch to the ON position. This light also comes on when the SRS is not working properly. If the ...

Tailgate open warning light
This warning light illuminates when the tailgate is not closed securely. ...

Other information:

Kia Cee'd JD Owners Manual: High - beam operation
1. Turn the light switch to the headlight position. 2. Push the lever away from you. The high-beam indicator will light when the headlight high beams are switched on. To prevent the battery from being discharged, do not leave the lights on for a prolonged time while the engine ...

Kia Cee'd JD Service Manual: PTC Heater (Diesel Engine) Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode and maximum heating position. (2) ...

© 2017-2026 www.kceed.com