Kia Cee'd: Smart Parking Assist System (SPAS) / How the system works (Exit mode)
The Exit Mode operates in the below condition:
- When vehicle speed is below 5 km/h the first time after the engine has been started.
- After parallel parking is completed with the Smart Parking Assist System.
1. Activate the Smart Parking Assist System
The shift lever should be placed in P (Park) or N (Neutral).
2. Select Exit Mode
3. Check surroundings
4. Steering wheel control
(1) Shift according to the instruction
on the LCD display.
(2) Drive slowly with the brake pedal
applied.
5. Exiting complete
If necessary, manually adjust position of vehicle.
✽ NOTICE
- Before activating the system check if the conditions are possible to use the system.
- For your safety, always apply the brake pedal except for when driving.
- 1. Activate Smart Parking Assist System
- 2. Select Exit Mode
- 3. Check surroundings
- 4. Steering wheel control
- 5. Exiting Complete
6. Smart Parking Assist System completed
Complete parking your vehicle according
to the instructions on the LCD display. If
required, manually control the steering
wheel and complete parking your vehicle.
✽ NOTICE
The brake pedal ...
1. Activate Smart Parking Assist
System
Press the Smart Parking Assist
System button (the button indicator will
illuminate).
The Parking Assist System will be activated
(the button indicator will illuminate).
A warning so ...
Other information:
Kia Cee'd JD Service Manual: License Lamp Repair procedures
Removal
[5Door]
1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp assembly after pushing the fixing clip (A).
3.
Replace the bulb (A) after removing the bu ...
Kia Cee'd JD Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within ...
