Kia Cee'd: Special driving conditions / Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions:
- Drive cautiously and allow extra distance for braking.
- Avoid sudden braking or steering.
- When braking with non-ABS brakes pump the brake pedal with a light upand- down motion until the vehicle is stopped.
WARNING - ABS
Do not pump the brake pedal on a vehicle equipped with ABS.
- If stalled in snow, mud, or sand, use second gear. Accelerate slowly to avoid spinning the drive wheels.
- Use sand, rock salt, tire chains, or other non-slip material under the drive wheels to provide traction when stalled in ice, snow, or mud.
WARNING - Downshifting
Downshifting with an automatic transaxle, while driving on slippery surfaces can cause an accident. The sudden change in tire speed could cause the tires to skid. Be careful when downshifting on slippery surfaces.
Rocking the vehicle
If it is necessary to rock the vehicle to
free it from snow, sand, or mud, first turn
the steering wheel right and left to clear
the area around your front wheels. Then,
shift back and forth b ...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the throttle body and connect a vacuum
pump to the nipple on the throttle body.
2.
Check the following points with applied vacuum using a vacuum pump.
...
Kia Cee'd JD Service Manual: Input Speed Sensor 2 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, i ...
