Kia Cee'd: Dual Clutch Transmission Control System / Gear Actuator Motor Description and operation

Description
The gear actuator motor is mounted on the complete shaft.
The gear actuator motor comprises the shift motor and select motor.
The gear actuator shift motor and select motor receive signals from the Transmission Control Module (TCM) to control the gear.

Clutch Actuator Motor 2 (Even Gear) Repair procedures
Inspection 1. Turn off the ignition switch. 2. Disconnect the clutch motor connector (A). 3. Meas ...

Gear Actuator Motor Specifications
Specification Gear Actuator Motor ▷ Specifications   Item Specifications Operating condition (°C) °F (20)68 ...

Other information:

Kia Cee'd JD Service Manual: PTC Heater (Diesel Engine) Repair procedures
Inspection Operating Logic Test (Manual only) Inspect the PTC operation with the confirmation logic below : 1. Entering (1) Set the Floor mode and maximum heating position. (2) ...

: Exterior Lamps
Switching the Turn Signal Lamps On and Off Push the lever up or down to switch the turn signal lamps on. Set the lever to the middle position to switch the turn signal lamps off. Note: Tap the lever up or down to make the turn signal lamps flash three times. Switching the Daytime Running Lamps ...

© 2017-2026 www.kceed.com