Kia Cee'd: Cylinder Block / External Damper Flywheel Components and components location

 

Components and components location

Components   1. Cylinder block 2. Ladder frame 3. Crankshaft 4. Crankshaft upper bearing 5. Crankshaft lower bearing 6. Thrust bearing 7. ...

External Damper Flywheel Repair procedures

Removal and installation 1. Remove the dual clutch transmission. (Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly") ...

Other information:

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Repair procedures
Inspection 1. Remove the ISG switch from the switch assembly. 2. Check the continuity between the switch 3 and 6 terminals as the ISG OFF switch is engaged. Removal 1. Tur ...

: Opening and Closing the Hood
Opening the Hood Open the left-hand front door. Fully pull the hood release lever and let it completely retract.Note: This action releases the hood latch. Fully pull the hood release lever for a second time.Note: This action fully releases the hood. Open the hood.Note: There is no secondary h ...