Kia Cee'd: Blower / Climate Control Air Filter Repair procedures

Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Blower / Climate Control Air Filter Repair procedures

Replacement

1.	Open the glove box.

2.	Disconnect the stopper (B) from the glove box (A).

3.	Disconnect the air damper (A) from the glove box (B).

4.	Remove the filter cover (A) by pressing the knob.

Replace the air filter (A) with a new one according to the direction of air filter.

•	In case of driving in an air-polluted area or rugged terrain, check and replace the air filter as frequently as possible.

6.	Install in the reverse order of removal.

Climate Control Air Filter Description and operation

Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well ...

Intake Actuator Description and operation

Description The intake actuator is located at the blower unit. It regulates the intake door by the signal from control unit. Pressing the intake selection switch will shift betwe ...

Other information:

Kia Cee'd JD Service Manual: Specifications
Specifications IMS Electrical System Item Specification Rating voltage DC 12V Operating voltage DC 9V ~ 16V Operating temperature -30°C ~ +80°C ...

Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Description and operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM. By using this signal, the ECM calcul ...