Kia Cee'd: Warnings and indicators (Instrument cluster) / Auto stop indicator
This indicator will illuminate when the engine enters the Idle Stop mode of the ISG (Idle Stop and Go) system.
When the automatic starting occurrs, the auto stop indicator on the cluster will blink for 5 seconds.
For more details, refer to the ISG (Idle Stop and Go) system in chapter 5.
For vehicles equipped with instrument cluster type B, the indicator illuminates on the LCD display.
✽ NOTICE
When the engine automatically starts by the ISG system, some warning lights (ABS, ESC, ESC OFF, EPS or Parking brake warning light) may turn on for a few seconds.
This happens because of low battery voltage. It does not mean the system is malfunctioning.
ESC OFF indicator
The ESC OFF indicator will illuminate
when the ignition switch is turned ON,
but should go off after approximately 3
seconds. To switch to ESC OFF mode,
press the ESC OFF button. The ESC
O ...
Cruise indicator
CRUISE indicator
The indicator illuminates when the cruise
control system is enabled.
The cruise indicator in the instrument
cluster is illuminated when the cruise
control ON-OFF button on ...
Other information:
Kia Cee'd JD Owners Manual: Trailer brakes
If your trailer is equipped with a braking
system, make sure it conforms to your
country’s regulations and that it is properly
installed and operating correctly.
If your trailer weight exceeds the maximum
allowed weight without trailer
brakes, then the trailer will also require its
ow ...
Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one
of the most important sensors of the engine control system. If there is no CKPS
signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder fra ...
