| Remove and Installation |
| 1. |
Remove the cylinder head assembly.
(Refet to Cylinder Head Assembly - "Cylinder Head")
|
| 2. |
Remove the water jacket Insert (A).
|
| 3. |
Install in the reverse order of removal.
|
Water Jacket Insert Components and components location
Rear Oil Seal Components and components location: Opening and Closing the Flip Key. Removing the Key Blade
Opening Your Flip Key
Press the round button on the remote
control to extend the flip key.
Note: Inspect the key blade for debris.
Periodically clean with a brush.
Closing Your Flip Key
Press and hold the round button on the
remote control to fold the key blade when
not in use.
Removing the Ke ...
Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resistance of lower arm ball joint
Low tire pressure
No power assist
Correct
...