Kia Cee'd: Vehicle stability management (VSM) / VSM operation
Kia Cee'd JD Owners Manual / Driving your vehicle / Brake system / Vehicle stability management
(VSM) / VSM operation
When the VSM is operating:
- ESC (Electronic Stability Control) (
)
light will blink. - The steering wheel may be controlled. When the vehicle stability management is operating properly, you can feel a slight pulsation in the vehicle. This is only the effect of brake control and indicates nothing unusual.
The VSM does not operate when:
- Driving on bank road such as gradient or incline
- Driving rearward
- ESC OFF indicator light (
)
remains
on the instrument cluster - EPS (Electronic Power Steering) indicator light remains on the instrument cluster
Vehicle stability management
(VSM)
This system provides further enhancements
to vehicle stability and steering
responses when a vehicle is driving on a
slippery road or a vehicle detected
changes in coefficient of friction betw ...
VSM operation off
If you press the ESC OFF button to turn
off the ESC, the VSM will also cancel and
the ESC OFF indicator light ()
illuminates.
To turn on the VSM, press the button again.
The ESC OFF indicator ...
Other information:
Kia Cee'd JD Owners Manual: EPB malfunction indicator
This warning light illuminates if the
engine start/stop button is changed to
the ON position and goes off in approximately
3 seconds if the system is operation
normally.
If the EPB malfunction indicator remains
on, comes on while driving, or does not
come on when the ignition switch o ...
Kia Cee'd JD Service Manual: Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ...
© 2017-2026 www.kceed.com
