Kia Cee'd: Specifications & Consumer information / Vehicle certification label
The vehicle certification label attached on the driver’s (or front passenger’s) side center pillar gives the vehicle identification number (VIN).
Vehicle identification number (VIN)
■ Frame number
The vehicle identification number (VIN) is
the number used in registering your vehicle
and in all legal matters pertaining to
its ownership, etc.
The number is punched on th ...
Tire specification and pressure label
The tires supplied on your new vehicle
are chosen to provide the best performance
for normal driving.
The tire label located on the driver's side
center pillar gives the tire pressures recomm ...
Other information:
Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light
switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
The auto light control doesn't work if the pin sunlight s ...
: Exterior Lamps
Switching the Turn Signal Lamps On and Off
Push the lever up or down to
switch the turn signal lamps on.
Set the lever to the middle position to
switch the turn signal lamps off.
Note: Tap the lever up or down to make the
turn signal lamps flash three times.
Switching the Daytime Running Lamps ...
