Kia Cee'd: Lighting System / Turn Signal Lamp Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / Turn Signal Lamp Repair procedures

Removal
Door Mirror Turn Signal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (A) from the mirror holder.

  
Be careful not to be damage the fixing clip (A).

3.
Disconnect the heating connectors (A) and BSD indicator connector (B) from the mirror.

4.
Disengage the fixing clip and remove the door mirror cover (A).

  
Take care not to damage the mirror cover fixing clip.
5.
Loosen a screw and disconnect the connector (A). Remove the door mirror turn signal lamp (B).

Installation
Door Mirror Turn Signal Lamp
1.
Install the door mirror turn signal lamp to the door mirror.
2.
Install the door mirror.
3.
Connect the negative (-) battery terminal.
Rear Combination Lamp Repair procedures
Removal [5Door] Rear Combination lamp (Inside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear comb ...

Puddle Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror (A) from the mirror holder. ...

Other information:

Kia Cee'd JD Owners Manual: FM radio station
FM broadcasts are transmitted at high frequencies and do not bend to follow the earth's surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains, or other obstructions. These can ...

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refe ...

© 2017-2020 www.kceed.com