Kia Cee'd: Dual Clutch Transmission Control System / Transmission Control Module (TCM) Description and operation

The Transmission Control Module (TCM) is like the brain for the Dual Clutch Transmission (DCT). It receives information from various sensors for a wide range of transmission controls to provide an optimal driving environment for the driver. The TCM is programmed for optimal operation in all driving conditions. If the TCM malfunctions, store the failure information in memory and provide the error information to a mechanic for fast and accurate repair.

Components and components location

Component Location   1. Even clutch actuator motor 2. Input shaft speed sensor 2 3. Intput shaft speed sensor 1 4. Gear Actuator 5. Inhibitor switch ...

Transmission Control Module (TCM) Schematic diagrams

TCM Connector and terminal function TCM Terminal Function Connector [A]   Pin Description Pin Description ...

Other information:

Kia Cee'd JD Service Manual: CVVT Oil Control Valve (OCV) Description and operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap ...

Kia Cee'd JD Service Manual: Fuel Sender Assembly Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender wiring connector (A). 3. Remove the fuel feed tube (A) from ...