Kia Cee'd: Lane departure warning system (LDWS) / The LDWS does not operate when
- The driver turns on the turn signal or the hazard warning flasher to change lane.
- Driving on the lane line.
✽ NOTICE
To change lane, operate the turn signal switch, then change the lane.
Warning indicator
When the LDWS is not working properly,
the warning light will illuminate and the
warning message will come on for a few
second. After the message disappears,
the master warning light will ...
The LDWS may not warn you even
if the vehicle leaves the lane, or
may warn you even if the vehicle
does not leave the lane when
The lane is not visible due to snow, rain,
stain, a puddle or many other things.
The brightness of the outside changes
suddenly.
Not turning on the headlight even at
night or in the tu ...
Other information:
: Starting and Stopping the Engine – Troubleshooting
Starting and Stopping the Engine – Warning Lamps
Malfunction Indicator Lamp
If it illuminates when the
engine
is running, the on-board
diagnostics system is detecting
a malfunction of the vehicle emission
control system.
If it flashes, engine misfire could be
occurring. Increased exhaust ga ...
Kia Cee'd JD Service Manual: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the BCM unit (A) after loosening nuts.
...
