Kia Cee'd: Ignition Lock Switch / Specifications

Specifications
 
Item
Specifications
Working voltage
 DC 12V 
Operating force
14.7 ± 2.9N
(1.5 ± 0.3kg, 3.3 ± 0.7lb)
Working temperature
-40°C ~ 80°C
(-40°F ~ 176°F)

Description and operation
Description • Ignition lock switch is mounted on the clutch pedal. • Ignition lock switch is operated when you press the clutch peda ...

Repair procedures
Inspection Signal Circuit Inspection 1. Check ignition lock switch pull-up voltage (1) IG KEY "OFF", ENGINE "OFF&q ...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
General Inspection After or before servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspection. &nb ...

Kia Cee'd JD Service Manual: IMS Control Switch Repair procedures
Inspection 1. Remove the IMS control switch connector (A). 2. With the IMS control switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the I ...

© 2017-2025 www.kceed.com