Kia Cee'd: Clutch Switch / Specifications

Specifications
 
Item
Specifications
Working voltage
 DC 12V 
Operating force
14.7 ± 2.9N
(1.5 ± 0.3kg, 3.3 ± 0.7lb)
Voltage drop
-0.4V
Working temperature
-40°C ~ 80°C
(-40°F ~ 176°F)

Description and operation
Description Clutch switch is connected to clutch pedal and transmits clutch operating state to ECM. When clutch pedal is depressed during driving, engine load changes from load ...

Repair procedures
Inspection Signal Circuit Inspection 1. Check clutch switch pull-up voltage (1) IG KEY "OFF", ENGINE "OFF". ...

Other information:

Kia Cee'd Service Manual: Repair procedures
Inspection 1. Check the clutch release cylinder for fluid leakage. 2. Check the clutch release cylinder boot for damage. Removal 1. Drain the brake fluid through the bleed plug (A). ...

Kia Cee'd Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...

© 2017-2019 www.kceed.com