Kia Cee'd: General Information / Special service tools
| Special Service Tools |
|
Item |
Illustration |
Application |
|
Fuel Pressure Gauge (09353-24100) |
|
Measuring the fuel line pressure |
|
Fuel Pressure Gauge Adapter (09353-02100) |
|
Connection between the high pressure fuel pump and the fuel feed line
|
|
Heated Oxygen Sensor Socket Wrench (09392-1Y100) |
|
Removal and installation of the heated oxygen sensor |
|
Torque Wrench Socket (09314-3Q100) or (09314-27130) (19mm) |
|
Removal and installation of the high pressure fuel pipe |
|
Injector Combustion Seal Guide & Sizing tool (09353-2B000) |
|
Installation of the injector combustion seal |
Specifications
Specifications
Fuel Delivery System
Items
Specification
Fuel Tank
Capacity
53 lit. (14.0 U.S.gal., ...
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' R ...
Other information:
Kia Cee'd JD Service Manual: Troubleshooting
Trouble Symptom Charts
Trouble Symptom 1
Trouble Symptom 2
Trouble symptom
Probable cause
Remedy
The set vehicle speed varies greatly upward or downward
"Surging" (repeated alterna ...
Kia Cee'd JD Service Manual: Cylinder Block Repair procedures
Removal
Engine removal is required for this procedure.
(Refer to Engine and transaxle assembly removal in this group)
1.
MT : Remove the flywheel.
(Refet to Cylinder Block - "Flywheel")
2.
AT : Remove the dr ...
© 2017-2026 www.kceed.com
