Kia Cee'd: General Information / Special service tools

Special Service Tools
 
Tool (Number and Name)
Illustration
Use
09561-11001
Steering wheel puller

Remove the steering wheel
09568-34000
Ball joint puller

Remove the ball joint

Specifications
Specifications   Item Specification Type Electric Power Steering System Steering gear Type ...

Repair procedures
Inspection Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure ...

Other information:

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder fra ...

Kia Cee'd JD Owners Manual: Multi fuse
If the multi fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel on the right side in the engine compartment. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the s ...

© 2017-2020 www.kceed.com