Kia Cee'd: Defroster / Rear window defroster
■ Manual climate control
■ Automatic climate control
The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while engine is running.
- To activate the rear window defroster, press the rear window defroster button located in the center facia switch panel. The indicator on the rear window defroster button illuminates when the defroster is ON.
- To turn off the defroster, press the rear window defroster button again.
✽ NOTICE
- If there is heavy accumulation of snow on the rear window, brush it off before operating the rear defroster.
- The rear window defroster automatically turns off after approximately 20 minutes or when the ignition switch is turned off.
Outside mirror defroster
The outside mirror defroster will operate at the same time you turn on the rear window defroster.
Front wiper deicer
The front wiper deicer will operate at the same time you turn on the rear window defroster.
Defroster
CAUTION
To prevent damage to the conductors
bonded to the inside surface of
the rear window, never use sharp
instruments or window cleaners
containing abrasives to clean the
window.
✽ NO ...
Manual climate control system
1. Fan speed control knob
2. Air conditioning button
3. Rear window defroster button
4. Mode selection knob
5. Air intake control button
6. Temperature control knob
CAUTION
Operating the blow ...
Other information:
: Ford Protect
WHAT IS FORD PROTECT
Protect yourself from the rising cost of
vehicle repairs with a Ford Protect
extended service plan.
Ford Protect Extended Service Plans - United States Only
Ford Protect extended service plans mean
peace of mind. Extended service plans are
backed by Ford Motor Company, and
...
Kia Cee'd JD Service Manual: Input Speed Sensor 2 Description and operation
Description
The input shaft speed sensor is important in that it detects the input shaft
RPM and sends this information to the Transmission Control Module (TCM).
It provides important input information for electric control.
The information is needed in all operations, i ...
