Kia Cee'd: Engine Control System / Purge Control Solenoid Valve (PCSV) Description and operation

Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fuel vapor stored in the canister is transferred to the intake manifold.

Injector Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance b ...

Purge Control Solenoid Valve (PCSV) Specifications

Specification   Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] ...

Other information:

Kia Cee'd JD Owners Manual: Mounting bracket for roof carrier
To install or remove a roof carrier, you can use the mounting bracket and cover on the roof. When you install a roof carrier, use the following procedure. 1. Insert a slim tool(coin or flat blade driver) into the slot and slide the cover toward the arrow on the cover. WARNING Use a c ...

Kia Cee'd JD Service Manual: TJ Joint Repair procedures
Replacement    • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease. • The boot ...