Kia Cee'd: Engine Control System / Camshaft Position Sensor (CMPS) Description and operation

Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.

It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect.

The CMPS is installed on engine head cover and uses a target wheel installed on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.

Crankshaft Position Sensor (CKPS) Repair procedures

Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” R ...

Camshaft Position Sensor (CMPS) Troubleshooting

Signal Waveform ...

Other information:

Kia Cee'd JD Service Manual: Rear Combination Lamp Repair procedures
Removal [5Door] Rear Combination lamp (Inside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear combination lamp cover (A). 3. Remove the mounting nuts (4EA) and ...

Kia Cee'd JD Owners Manual: Driving on grades
Reduce speed and shift to a lower gear before you start down a long or steep downgrade. If you don’t shift down, you might have to use your brakes so much that they would get hot and no longer operate efficiently. On a long uphill grade, shift down and reduce your speed to around 70 k ...