| Description |
| • |
Signal of neutral switch is transmitted to the ECM in the neutral state.
|
| • |
This signal is blocked when gear changed.
|
| • |
When the signal is blocked, The ECM controls the fuel injection quantity
mapping value for 1st gear so that vehicle can start properly.
|

Neutral Switch Specifications
Neutral Switch Repair proceduresKia Cee'd JD Service Manual: Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV
valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end ...
Kia Cee'd JD Service Manual: Repair procedures
Inspection
Lighting Switch Inspection
With the multifunction switch in each position, make sure that continuity exists
between the terminals below. If continuity is not as specified, replace the
multi-function switch.
Lighting Switch (Auto Light)
Lighting S ...