Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 1 Specifications

Specification
Input Speed Sensor 1
▷ Type: Hall effect sensor
▷ Specifications
 
Item
Specifications
Output voltage (V)
Low
0.7
High
1.4

Input Speed Sensor 1 Description and operation
Description The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM). It provides i ...

Input Speed Sensor 1 Schematic diagrams
Schematic Diagrams ...

Other information:

: Installing a Child Restraint in a Center Seat. Combining the Seatbelt and Lower Anchors for Attaching Child Restraints
Installing a Child Restraint in a Center Seat WARNING: The standardized spacing for LATCH lower anchors is 11 in (280 mm) center to center. Do not use LATCH lower anchors for the center seating position unless the child restraint manufacturer's instructions permit and specify using anchors spa ...

Kia Cee'd JD Service Manual: Roll Blind Repair procedures
Replacement [Removal] 1. Remove the roof trim. (Refer to Roof Trim - "Roof Trim Assembly") 2. Open the movable glass fully. 3. Loosen the roll blind lower bracket (A) mounting screws ...

© 2017-2026 www.kceed.com