Kia Cee'd: Windshield Wiper/Washer / Heated Washer Nozzle Components and components location

Rain Sensor Repair procedures

Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are c ...

Heated Washer Nozzle Repair procedures

Removal 1. Remove the cowl top cover. (Refer to the BD group - "Cowl Top Cover") 2. Disconnect the heated washer nozz ...

Other information:

Kia Cee'd JD Service Manual: Oil Level Gauge & Pipe Repair procedures
Removal and Installation 1. Remove the oil lever gauge(A). Tightening torque: 9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) 2. Install in the reverse order of removal. ...

Kia Cee'd JD Owners Manual: Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 in.) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing ...