Kia Cee'd: Steering wheel / Heated Steering wheel Repair procedures

Kia Cee'd JD Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inpection
1.
Measure a resistance of NTC and Heated pad.
NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%
2.
Measure a temperature.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
At that time switch on, all measure point (1~8)

Heated Steering wheel Schematic diagrams
System Circuit Diagram Terminal Function   Housing Pin Function Wire color Pad A ...

Flex Steering Components and components location
Components Location   1. Flex steering switch ...

Other information:

Kia Cee'd JD Owners Manual: Fuel filter warning light (Diesel engine)
This warning light illuminates for 3 seconds after the ignition switch is set to the ON position and then it will go out. If it lights up while the engine is running, it indicates that water has accumulated inside the fuel filter. If this happens, remove the water from the fuel filter. ...

Kia Cee'd JD Service Manual: Rear Wiper Motor Repair procedures
Inspection Rear Wiper Motor 1. Remove the 4P connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 3 and 4 respectively. 3. Check that the motor ...

© 2017-2020 www.kceed.com