Kia Cee'd: Dual Clutch Transmission Control System / Gear Actuator Motor Specifications

Specification
Gear Actuator Motor
▷ Specifications
 
Item
Specifications
Operating condition (°C) °F
(20)68
Output resistance (mΩ)
48 ± 3.4

Gear Actuator Motor Description and operation
Description The gear actuator motor is mounted on the complete shaft. The gear actuator motor comprises the shift motor and select motor. The gear actuator shift motor and se ...

Gear Actuator Motor Schematic diagrams
Schematic Diagrams ...

Other information:

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform [NON-ISG] This example shows a typical Crankshaft Position Sensor(CkPS) and Camshaft Position Sensor(CMPS) waveform at idle.The PCM controls the injection and ignition timing by using these signals. Generally CkPS signal is used to dete ...

Kia Cee'd JD Service Manual: Muffler Repair procedures
Removal and Installation [Front muffler] 1. Disconnect the rear oxygen sensor connector (A). 2. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ...

© 2017-2022 www.kceed.com