Kia Cee'd: Front Suspension System / Front Stabilizer Link Repair procedures

Kia Cee'd Service Manual / Suspension System / Front Suspension System / Front Stabilizer Link Repair procedures

Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)

  
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
3.
Remove the stabilizer link (A) loosening the nut (B) and (C).
Tightening torque :
98.1 ~ 117.7N.m(10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Front Stabilizer Bar Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front w ...

Sub Frame Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front w ...

Other information:

Kia Cee'd Service Manual: Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the lower crash pad switch assembly (A) ...

Kia Cee'd Owners Manual: Operating condition
1.Place the light switch in the AUTO position. 2.Turn on the high beam by pushing the lever away from you. The high beam assist indicator will illuminate. 3.The High Beam Assist will turn on when vehicle speed is above 45km/h. 4. If the light switch is placed to the headlight position, t ...

© 2017-2019 www.kceed.com