Kia Cee'd: Cylinder Block / External Damper Flywheel Repair procedures

Kia Cee'd JD Service Manual / Engine Mechanical System / Cylinder Block / External Damper Flywheel Repair procedures

Removal and installation
1.
Remove the dual clutch transmission.
(Refer to Dual Clutch Transmisson(DCT) - "Dual Clutch Transmisson Assembly")
2.
Remove the external damper (A).
Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.
External Damper Flywheel Components and components location
Components   1. External damper flywheel ...

Water Jacket Insert Components and components location
Components   1. Water Jacket Insert ...

Other information:

Kia Cee'd JD Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the filling hose (2) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the ...

Ford Escape 2020-2026 Owners Manual: Using Lower Anchors and Tethers for Children
WARNING: Do not attach two child safety restraints to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety restraint attachments and may break, causing serious injury or death. WARNING: Depending on where you secure a child restraint, and depending on the ...

© 2017-2026 www.kceed.com