Kia Cee'd: Engine start/stop button / Engine start/stop button position

Illuminated engine start/stop button
Whenever the front door is opened, the engine start/stop button will illuminate for your convenience. The light will go off after about 30 seconds when the door is closed. It will also go of ...

OFF
With manual transaxle To turn off the engine (START/RUN position) or vehicle power (ON position), stop the vehicle then press the engine start/stop button. With automatic transaxle/DCT* To ...

Other information:

Kia Cee'd JD Service Manual: Parking Brake Cable Repair procedures
Removal    The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. 1. Remove the floor console assembly. (Refer t ...

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refe ...

© 2017-2026 www.kceed.com