Kia Cee'd: Driving your vehicle / Engine start/stop button

Kia Cee'd JD Owners Manual / Driving your vehicle / Engine start/stop button

Starting the diesel engine
To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then have to be warmed up before starting to drive. 1.Make sure the parking brake is ...

Illuminated engine start/stop button
Whenever the front door is opened, the engine start/stop button will illuminate for your convenience. The light will go off after about 30 seconds when the door is closed. It will also go of ...

Other information:

Kia Cee'd JD Owners Manual: Follow the steps 1 to 7 from the previous chapter.
8. Remove the cover by turning it counterclockwise. 9. Disconnect the headlight bulb socketconnector. 10. Unsnap the headlight bulb retaining wire by depressing the end and pushing it upward. 11. Remove the bulb from the headlight assembly. 12. Install a new headlight bulb and snap the h ...

Kia Cee'd JD Service Manual: Input Speed Sensor 1 Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the battery (-) cable. 2. Remove the under cover. 3. ...

© 2017-2026 www.kceed.com