Kia Cee'd: Driver position memory system / Easy access function
The system will move the driver's seat automatically as follows:
- Without smart key system
- It will move the driver’s seat rearward when the ignition key is removed and front driver’s door is opened.
- It will move the driver’s seat forward when the ignition key is inserted. - With smart key system
- It will move the driver’s seat rearward when the engine start/stop button is changed to the OFF position and front driver’s door is opened.
- It will move the driver’s seat forward when the engine start/stop button is changed to the ACC or START position.
You can activate or deactivate this feature. Refer to "User settings" in section 4.
Storing positions into memory using
the buttons on the door
Storing driver’s seat positions
1. Shift the shift lever into P or N (for
Automatic transaxle) or Neutral (for
manual transaxle) while the engine
start/stop button is ON or ignition
switch ...
Headrest
The driver's and front passenger's seats
are equipped with a headrest for the
occupant's safety and comfort.
The headrest not only provides comfort
for the driver and front passenger, but
a ...
Other information:
Kia Cee'd JD Service Manual: Rear Cross Member Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
88.2 ~ 1 ...
Kia Cee'd JD Service Manual: Master Cylinder Repair procedures
Removal [LHD]
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the battery.
(Refer to Engine Electrical system-"Battery")
3.
Remove the ECM.
...
