Kia Cee'd: Timing System / Drive Belt Tensioner Repair procedures

Kia Cee'd Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Repair procedures

Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the alternator.
(Refer to Engine Electrical System - "Alternator")
3.
Remove the alternator bracket(belt tunsioner) (A).
Tightening torque :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m, 14.5 ~ 19.5 lb-ft)

4.
Install in the reverse order of removal.
Drive Belt Tensioner Components and components location
Components   1. Drive belt tensioner ...

Crankshaft Damper Pulley Components and components location
Components   1. Crankshaft damper pulley ...

Other information:

Kia Cee'd Service Manual: Power Mosfet (DATC) Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed. ...

Kia Cee'd Owners Manual: Map lamp
■ Type A ■ Type B Press the lens (1) to turn the map lamp on or off /OFF (2) : The lamps are off even if a door is opened. /DOOR (3) : - The map lamp comes on when a door is opened. If you close the door, the lamps go out after approximately 30 seconds. - The ma ...

© 2017-2019 www.kceed.com