Kia Cee'd: Luggage rail system (wagon) / Build in segmentation bar

Kia Cee'd JD Owners Manual / Features of your vehicle / Interior features / Luggage rail system (wagon) / Build in segmentation bar

Put both pillars (A) from the segmentation bar in the openings from the rail.
To move the segmentation bar, put your hand on the side of the pillar and push down the lever arm (B).
Make sure the pillars click into place.
To release the belt, turn the upper element (C) to the left or right until it clicks.
Now you can pull the belt (D) and secure your luggage by putting the belt around the luggage and put the hook (E) into the middle of the segmentation bar (F).
For bulky luggage, you can hook both hooks into each other.
To make sure the belt locks, put the upper element (C) back into the lock position (1).

CAUTION

The segmentation bar must be mounted and demounted with both pillars simultaneously.
Max. load: 30 kg with one belt 40 kg with two belts

Luggage rail system (wagon)

The luggage rail system may prevent the luggage from sliding around in the luggage compartment. ...

Applying the shackle on the guide rail

Put the shackle (A) in the position where the shackle is put in the rail. To move the shackle, press the button (1) and move the shackle along the rail. Make sure the shackle is clicked ...

Other information:

Kia Cee'd JD Service Manual: Rain Sensor Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...

Kia Cee'd JD Service Manual: Coolant Repair procedures
Replacement And Air Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator. ...