Removal |
|
1. |
Remove the glove box housing.
(Refer to the Body - "Glove Box Housing")
|
2. |
Remove the SPAS unit (A) after removing the nut and disconnecting the
connector.
|
Installation |
1. |
Connect the connectors and install the SPAS unit (A).
|
2. |
Install the glove box housing.
|
Inspection |
1. |
The SPAS (Smart Parking Assist System) can diagnose by using the GDS
more quickly.
The SPAS communicates with the GDS and then reads the input/output value
and drives the actuator.
|
2. |
To diagnose the SPAS (Smart Parking Assist System) function, select
the menu of model and SPAS.
|
3. |
To consult the present input/output value of SPAS, "Current DATA". It
provides information of SPAS input/output conditions.
|
4. |
To perform compulsory operation on SPAS input factors, select "ACTUATION
TEST".
|
5. |
To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES"
|
6. |
After replacing the SPAS unit, perform the "SPAS Variant Coding" procedure
with GDS.
|
Kia Cee'd JD Service Manual: IMS Power Seat Control Repair procedures
Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace ...
Kia Cee'd JD Service Manual: Steering Column Shroud Panel Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
...